idk if the files are incripted, but what you could probably do, is go into the settings and flip the image, or even replace it entirely. as long as the name and file type are the same, it shouldn't matte
Hi there! I have an issue where the Arm is causing my capture on my screen to flash sometimes. I use OBS Studios. Do you know how I can fix that from happening?
Heyo! Yes, the capture settings are a bit fiddly, sorry. I'd recommend trying it as a Window Capture if you're using a Game Capture, or visa versa. That, or try the different Capture Method settings on a Window Capture. I hope that helps!
is there a way to force it to be 1920x1080? if i maximize the window im still missing a bit at the top and the bottom due to the taskbar and the window name bar
For the spud tablet is the wrist/hand supposed to disappear on the outer sides of your screen? I can't seem to find out how to adjust whatever this is, so I'm wondering if it's intentional!
The arm window is able to fullscreen, but the tablet window refuses to. I think this may be the problem because the arm also disappears until I make the window fullscreen.
The tracking area for both the arm and the tablet is defined by the Spud Arm window, so to have everything work correctly, you'll want to have the Spud Arm window fullscreened or maximized behind your drawing software.
The Spud Tablet window stays a fixed size to make it easier to keep it properly aligned in your stream layout.
The hands are intentionally set up to disappear when the cursor goes too far outside of the tracking area - without this, some strange things could potentially happen when you need to use your cursor on a different monitor.
Hey! I've seen a bunch of people asking for a Mac version, and I wanted to share that I've been able to get Spud Tablet working ok (so far) using Crossover. It took a bunch of attempts and I'm not totally sure what I did in the end, but for anyone who is comfortable messing around with that sort of emulation, you can get it running on a Mac with a little effort. Thank you so much for making this, I'm really looking forward to trying it out in a future stream!
I should also add that it also seems to work with an iPad and Sidecar (using the iPad like a Cintiq) though I haven't tried it for longer than a few minutes. Seems ok, though?
When you click the "Install a Windows Application" button, there's a "Browse All Applications" button at the bottom of the window that pops up. Then you pick "Unlisted Application" and continue from there.
It can’t run on the iPad itself, these instructions are for using it on a Mac with the iPad acting as a tablet using Sidecar. I haven’t really used it much since around the time I originally posted so things may have also changed there too. Sorry I can’t be more helpful! :(
Heyo, to have Spud Arm appear left-handed, you'll want to set LeftyMode to true in SpudTabletArmSettings.ini, and then mirror (transform > flip horizontal) the arm capture in your streaming software.
Hi there! Just wanted to say thank you for making this~ I do have a question about the canvas size of the 'Hand.png' - it is currently at 300 x 400 px - I was wondering, is it possible to increase the size of it or to reposition the red tip of the pen? Thanks in advance!
hey, dont know if this is just happening to me or not or if my half a braincell isnt working but i keep getting missing code errors, 3 of them and wont load up the program, am i missing something?
Heyo. To make sure it grabs the correct window, you'll want to make sure you're using a window capture with the Window Match Priority set to "Window title must match".
hello! I just download it but why there's no "spud arm"? I just get the "spud tablet & arm.exe" but there's no arm only. Or I need to settings something first? thank you!
Heyo! Yeah, they're tied together at the moment, so if you only want to use one of the two, just only capture one of the windows in your streaming software.
If performance is a concern, you should be able to minimize the performance impact of the window you're not using by replacing the relevant sprites with tiny pngs - like, 1 pixel by 1 pixel kinda tiny.
Hello! The thing is great, but is it possible to add a layer above the Hand that's rigged to the Arm layer? This is mostly me being too lazy to draw a sleeve that's flush with the Arm.
Hello! HandBottom.png is layered underneath Arm.png, so saving your drawn hand as the HandBottom sprite (and using a transparent/empty image for Hand.png) should let you layer the sleeve over it.
In OBS, select the source with the SpudTablet, click filter, right click the empty space on the left and click chroma key. It should automatically make the greenscreen transparent but if it doesnt, make sure that the "Key Color Type" is set to Green
Assuming you mean custom images, yes, sizing is very important. There are photoshop templates available for download, and for custom art to work correctly, you'll want to make sure everything matches up with those in terms of size and position.
hey!! idk if youll see this, but im hoping you do bc this is a bit of a problem! i use discord reactive images as a temporary useage for vtubers on my streams, but the spud hand covers them! i need help D: what do i do to get rid of that?
Hi! I'm not entirely sure I understand the problem, but you should be able to re-order the sources in your streaming software to place the arm behind the reactive images?
Heyo! You should be able to make the arm pretty much whatever size you like by editing the sprites, though you will have to adjust the Pointer Offset and Wrist Offset in the .ini to match the new positions of the tip of the pen and the wrist in the sprites. The arm template in the templates download contains a better explanation of exactly how that all works.
I am so sorry about I'm asking below things through a comment, but I could not find your mail address anywhere in this page.
Anyway, I just want to ask for permission whether if it is possible for me or someone to stream or upload a video whilst playing your game "Spud Tablet ", online.
Also if it is possible, I would like to monetize and use superchat on stream and video.
I am sorry for the sudden message, thanks for your time.
Yes, it is entirely fine to use Spud Tablet in monetized streams or videos - that's pretty much what it was made for.
A credit in the video or stream description (either to this itch page or to my twitter, @Virtual_Graves) would be greatly appreciated, but is not required.
Extremely based of you to make it free. I hope that you get the deserved return on it by those who can! i'm not a vtuber so its very unlikely ill ever use this, but i'm happy that the comunnity is so wholesome and full of individuals that help each other like this
Hi I have a problem with OBS confusing the two windows for one another and I never seem to get them in the same capture without one becoming the other - do I have to restart?
I'm having a problem where the capture of the program looks fine on my main monitor, but when I move the window to my tablet (basically like a 3rd monitor) it gets weird - you can see in the GIF above how I when I change the which monitor the program is tracking it works fine on my main monitor but everything messes up when i use it on my drawing tablet!
Also - Is it possible to make the hand a bit smaller, I've had a look in the settings file and I might be stupid but I can't find anything on resizing the hand, I tried resizing the hand and arm images but that only messed the wrist up.
Is there an easy fix to make it smaller - it kinda covers a big part of my screen!
Hey there, is it possible to change which monitor is being tracked? For tablets with screens built in this doesn't seem to work as I'm assuming it's not the main monitor.
When opening the program two windows will open, one with the tablet and the hand, and one with the hand - if you move the tab with the hand down to the monitor you want it to track they will both track that specific monitor!
This is great! Sent a donation, you guys really deserve it and did such an excellent job!
If you can I'm in need of some help. The app works perfectly, except only when Windows Ink is activated. Everything stops right when I press the pen on the screen. The hand will only follow when the pen is not on the screen.
I know you said you might not update the app, but I'd like to just share this as if you decide to it will really help out me and a lot of people. Thank you guys again for creating this wonderful app
(Update: Not too big of a deal since I can get some apps working like Krita and Photoshop working pressure wise without Windows ink)
That said, that is a very strange interaction, and I am afraid it may not be something we'll able to fix. Despite being intended for use with a drawing tablet, Spud Tablet is based entirely on cursor tracking, and not on anything tablet/pen specific. It appears that Windows Ink is preventing tablet/pen input from moving the cursor while it's actively drawing, so the arm doesn't move because the cursor isn't moving.
I'll see if I can figure out some way to work around that, but I can't promise I'll actually be able to come up with anything, sorry.
Absolutely, thank you for giving it a look! If you ever fix it, it'll be awesome but I understand that there are no promises. I still am absolutely in love with the software, I think it's really cool that this as well as Spud Controller exists. For the sake to help things like Twitch streams and VTuber things.
Yes, that is intended. The tracking for both the arm and the tablet is done by the Spud Arm window - that's the one you'll want to fullscreen behind your drawing software.
Thank you for made this set! I'm not good at english, but I have some problem with my settings. The language is mandarin, hope you don't mind it. The problem is I choose the game window for sources, and invisible background, but it still there, did I do something wrong on setting?
It's a little weird, but it is possible to make Spud Arm left-handed. You should just need to set LeftyMode to true in Settings.ini, and then Transform -> Flip Horizontal on the Spud Arm source in OBS (or whatever stream software you use).
To fix this problem you need the "Arm Rigging" to be the same canvas as for the Art program itself on whatever streaming software you're using!
Right click -> Transform -> Fit to Screen FOR BOTH DISPLAYED SCREENS and this should fix your issue :] happy arting!
edit: if its still funky looking go under 'Preferences' in your drawing program and mess around with the cursor and other settings it offers. I am currently doing that now and it's been improving!
OMG edit 2....: Okay so this was a easy fix. What I did is SLIGHTLY adjusting the art program and leaving the Hand+Pen to be its full screen OBS size [which mine is 1270x720]. And it's fixed!
I think I have fixed this with the 1.1 update that just went up!
I suspect something was causing it to run at an uncapped framerate instead of at the 60fps that was intended, so there is now a more strict ini-configurable framerate limit that should make it impossible for it to run uncapped.
← Return to tool
Comments
Log in with itch.io to leave a comment.
is there a way to make if left handed? I cant find a way
I would also love for a left handed version!
idk if the files are incripted, but what you could probably do, is go into the settings and flip the image, or even replace it entirely. as long as the name and file type are the same, it shouldn't matte
how do you remove the green screen thing? I put it in obs and the green screen still stays there
add it to obs as a window capture and chromakey out the background
does this work for when your using your ipad procreate?
Hi there! I have an issue where the Arm is causing my capture on my screen to flash sometimes. I use OBS Studios. Do you know how I can fix that from happening?
Heyo! Yes, the capture settings are a bit fiddly, sorry. I'd recommend trying it as a Window Capture if you're using a Game Capture, or visa versa. That, or try the different Capture Method settings on a Window Capture. I hope that helps!
is there a way to force it to be 1920x1080? if i maximize the window im still missing a bit at the top and the bottom due to the taskbar and the window name bar
Will this work if I’m drawing directly on my ipad and not on my pc?
EPICC
For the spud tablet is the wrist/hand supposed to disappear on the outer sides of your screen? I can't seem to find out how to adjust whatever this is, so I'm wondering if it's intentional!
The arm window is able to fullscreen, but the tablet window refuses to. I think this may be the problem because the arm also disappears until I make the window fullscreen.
The tracking area for both the arm and the tablet is defined by the Spud Arm window, so to have everything work correctly, you'll want to have the Spud Arm window fullscreened or maximized behind your drawing software.
The Spud Tablet window stays a fixed size to make it easier to keep it properly aligned in your stream layout.
The hands are intentionally set up to disappear when the cursor goes too far outside of the tracking area - without this, some strange things could potentially happen when you need to use your cursor on a different monitor.
Ahh, I see! Thank you so much!! Very excited to use this in any future streams/videos :DD
32 bits pls
Hey! I've seen a bunch of people asking for a Mac version, and I wanted to share that I've been able to get Spud Tablet working ok (so far) using Crossover. It took a bunch of attempts and I'm not totally sure what I did in the end, but for anyone who is comfortable messing around with that sort of emulation, you can get it running on a Mac with a little effort. Thank you so much for making this, I'm really looking forward to trying it out in a future stream!
I should also add that it also seems to work with an iPad and Sidecar (using the iPad like a Cintiq) though I haven't tried it for longer than a few minutes. Seems ok, though?
How did you get Spud to run on Crossover. It's an unlisted application & I'm not sure how to run those
When you click the "Install a Windows Application" button, there's a "Browse All Applications" button at the bottom of the window that pops up. Then you pick "Unlisted Application" and continue from there.
hey sorry i know this is three years late but i wanted to ask how you get the spud hand to work with the ipad?
It can’t run on the iPad itself, these instructions are for using it on a Mac with the iPad acting as a tablet using Sidecar. I haven’t really used it much since around the time I originally posted so things may have also changed there too. Sorry I can’t be more helpful! :(
Is the a way to add dangle charm animations to the pen?
How do I edit it for left handed people
Heyo, to have Spud Arm appear left-handed, you'll want to set LeftyMode to true in SpudTabletArmSettings.ini, and then mirror (transform > flip horizontal) the arm capture in your streaming software.
Hi there! Just wanted to say thank you for making this~ I do have a question about the canvas size of the 'Hand.png' - it is currently at 300 x 400 px - I was wondering, is it possible to increase the size of it or to reposition the red tip of the pen? Thanks in advance!
hey, dont know if this is just happening to me or not or if my half a braincell isnt working but i keep getting missing code errors, 3 of them and wont load up the program, am i missing something?
hey my obs keeps capturing Spud arm when I want it to capture Spud Tablet. Is there something I can do to fix this?
Heyo. To make sure it grabs the correct window, you'll want to make sure you're using a window capture with the Window Match Priority set to "Window title must match".
hello! I just download it but why there's no "spud arm"? I just get the "spud tablet & arm.exe" but there's no arm only. Or I need to settings something first? thank you!
Heyo! Yeah, they're tied together at the moment, so if you only want to use one of the two, just only capture one of the windows in your streaming software.
If performance is a concern, you should be able to minimize the performance impact of the window you're not using by replacing the relevant sprites with tiny pngs - like, 1 pixel by 1 pixel kinda tiny.
for some reason, when i put my mouse on the specific monitor it works fine, but when i try using my stylus on it, it stops tracking and stays still.
Hello! The thing is great, but is it possible to add a layer above the Hand that's rigged to the Arm layer? This is mostly me being too lazy to draw a sleeve that's flush with the Arm.
Hello! HandBottom.png is layered underneath Arm.png, so saving your drawn hand as the HandBottom sprite (and using a transparent/empty image for Hand.png) should let you layer the sleeve over it.
Oh. Well now I feel stupid
How i do it transparent in OBS Studio? can someone help me?
In OBS, select the source with the SpudTablet, click filter, right click the empty space on the left and click chroma key. It should automatically make the greenscreen transparent but if it doesnt, make sure that the "Key Color Type" is set to Green
I already figured but...
Thanks dude, you're awesome
Does it have to be a specific size? Mine doesn't seem to want to fit the window
Assuming you mean custom images, yes, sizing is very important. There are photoshop templates available for download, and for custom art to work correctly, you'll want to make sure everything matches up with those in terms of size and position.
hey!! idk if youll see this, but im hoping you do bc this is a bit of a problem!
i use discord reactive images as a temporary useage for vtubers on my streams, but the spud hand covers them! i need help D: what do i do to get rid of that?
Hi! I'm not entirely sure I understand the problem, but you should be able to re-order the sources in your streaming software to place the arm behind the reactive images?
heya! im just wondering if theirs anyway i can make the arm and hand smaller? love this by the way, keep up the great work! :D
Heyo! You should be able to make the arm pretty much whatever size you like by editing the sprites, though you will have to adjust the Pointer Offset and Wrist Offset in the .ini to match the new positions of the tip of the pen and the wrist in the sprites. The arm template in the templates download contains a better explanation of exactly how that all works.
Hello！
I am so sorry about I'm asking below things through a comment, but I could not find your mail address anywhere in this page.
Anyway, I just want to ask for permission whether if it is possible for me or someone to stream or upload a video whilst playing your game "Spud Tablet ", online.
Also if it is possible, I would like to monetize and use superchat on stream and video.
I am sorry for the sudden message, thanks for your time.
Hope to hear from you soon.
Hi. Sorry, but I think you have commented on the wrong page - I have nothing to do with the game you have mentioned.
I'm terribly sorry. I feel so bad. I mean this game "spud-tablet".
I sincerely apologize for the mistyping.
Ah, no worries, it happens.
Yes, it is entirely fine to use Spud Tablet in monetized streams or videos - that's pretty much what it was made for.
A credit in the video or stream description (either to this itch page or to my twitter, @Virtual_Graves) would be greatly appreciated, but is not required.
This is amazing! Thank you so much for making this <3
I wish there was a way to use this with ipad's procreate ;;;w;;;
I was wondering if there would be a chance to be put on Mac someday?
A mac version is unlikely, sorry - developing for mac is outside of my skillset.
Extremely based of you to make it free.
I hope that you get the deserved return on it by those who can!
i'm not a vtuber so its very unlikely ill ever use this, but i'm happy that the comunnity is so wholesome and full of individuals that help each other like this
Hi I have a problem with OBS confusing the two windows for one another and I never seem to get them in the same capture without one becoming the other - do I have to restart?
NVM!! turns out I just need to use window capture and not game TwT I forgot using filters for chroma was also a thing ;w;
I'm having a problem where the capture of the program looks fine on my main monitor, but when I move the window to my tablet (basically like a 3rd monitor) it gets weird - you can see in the GIF above how I when I change the which monitor the program is tracking it works fine on my main monitor but everything messes up when i use it on my drawing tablet!
Also - Is it possible to make the hand a bit smaller, I've had a look in the settings file and I might be stupid but I can't find anything on resizing the hand, I tried resizing the hand and arm images but that only messed the wrist up.
Is there an easy fix to make it smaller - it kinda covers a big part of my screen!
Hey there, is it possible to change which monitor is being tracked? For tablets with screens built in this doesn't seem to work as I'm assuming it's not the main monitor.
Thanks!
When opening the program two windows will open, one with the tablet and the hand, and one with the hand - if you move the tab with the hand down to the monitor you want it to track they will both track that specific monitor!
Can't wait to be able to support this.
Hiyo! I'd like to know if there's a way to add a GIF or any other image format that allows animations, instead of .PNG please?
Another question is if it's possible to edit the tablet image size/shape (the red zone!), thank you very much!
Heyo, the system I am using for graphics does not support animated formats, sorry.
If you can I'm in need of some help. The app works perfectly, except only when Windows Ink is activated. Everything stops right when I press the pen on the screen. The hand will only follow when the pen is not on the screen.
Maybe this will help:
https://docs.microsoft.com/en-us/windows/uwp/design/input/pen-and-stylus-interac...
I know you said you might not update the app, but I'd like to just share this as if you decide to it will really help out me and a lot of people. Thank you guys again for creating this wonderful app
(Update: Not too big of a deal since I can get some apps working like Krita and Photoshop working pressure wise without Windows ink)
Thank you for the donation!
That said, that is a very strange interaction, and I am afraid it may not be something we'll able to fix. Despite being intended for use with a drawing tablet, Spud Tablet is based entirely on cursor tracking, and not on anything tablet/pen specific. It appears that Windows Ink is preventing tablet/pen input from moving the cursor while it's actively drawing, so the arm doesn't move because the cursor isn't moving.
I'll see if I can figure out some way to work around that, but I can't promise I'll actually be able to come up with anything, sorry.
Absolutely, thank you for giving it a look! If you ever fix it, it'll be awesome but I understand that there are no promises. I still am absolutely in love with the software, I think it's really cool that this as well as Spud Controller exists. For the sake to help things like Twitch streams and VTuber things.
Keep making stellar things! ✨
Yes, that is intended. The tracking for both the arm and the tablet is done by the Spud Arm window - that's the one you'll want to fullscreen behind your drawing software.
Thank you for made this set! I'm not good at english, but I have some problem with my settings. The language is mandarin, hope you don't mind it.
The problem is I choose the game window for sources, and invisible background, but it still there, did I do something wrong on setting?
Yes, you need to use a Chroma Key Filter in your streaming software to get rid of the background colour. I hope that helps!
It's already ok now! Thank you so much, I'm really love it!
Have you guys ever planned on a left-handed version??
It's a little weird, but it is possible to make Spud Arm left-handed. You should just need to set LeftyMode to true in Settings.ini, and then Transform -> Flip Horizontal on the Spud Arm source in OBS (or whatever stream software you use).
hello! i have this problem where it doesnt track correctly where the cursor its and idk what to do
my screen resolution its 1920x1080
To fix this problem you need the "Arm Rigging" to be the same canvas as for the Art program itself on whatever streaming software you're using!
Right click -> Transform -> Fit to Screen FOR BOTH DISPLAYED SCREENS and this should fix your issue :] happy arting!
edit: if its still funky looking go under 'Preferences' in your drawing program and mess around with the cursor and other settings it offers. I am currently doing that now and it's been improving!
OMG edit 2....: Okay so this was a easy fix. What I did is SLIGHTLY adjusting the art program and leaving the Hand+Pen to be its full screen OBS size [which mine is 1270x720]. And it's fixed!
it worked!! thank so much!
There's no reason this should be using almost 90% GPU on a 2060 Super, how do I lower that?
I think I have fixed this with the 1.1 update that just went up!
I suspect something was causing it to run at an uncapped framerate instead of at the 60fps that was intended, so there is now a more strict ini-configurable framerate limit that should make it impossible for it to run uncapped.
Aha, thank you!
Also reading my message back it probably falls a bit on the passive-aggressive side, I'm really sorry about that- it's never really my intention! <3
ahh if only i have a windows. do you think there could be a mac version someday :O ???